|
Thu, Sep 15, 11 at 0:56
| Our duet dryer was working fine last time it was used. Today when they delivered the new washing machine we slid the dryer over from the right to the left side of the laundry room. All we did was unplug and plug back in and it slid less than 4 feet.
now the dryer looks like is working- tumbling clothes, etc. but there is NO HEAT. What do i do??? |
Follow-Up Postings:
|
| False alarm... gas line was shut off. At least it made me look behind there and realize we should probably re-configure the vent line. The laundry machine being moved from right to left side moves it closer to exterior vent and it is in some funky S curve configuration. You know that will make a problem eventually! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Laundry Room Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.