|
Wed, Aug 4, 10 at 22:48
| I have had my Duet dryer for 2 years without any problems until today. I pressed the power button and it turned on (green), then I pressed the START button (held for a few seconds)and I can hear a click, the start buttom lights up but it will not start running. The timer will count down if I watch it for a few minutes but it will not start. I have checked my breaker box, unplugged and replugged the dryer, opened and shut the door to be sure it was closed properly, tried different settings, etc and no luck. It was working 2 days ago and now this.I feel like it is a problem in the electric starter...
Has this happened to anyone?? If so, what did you do to correct the problem ? Any suggestions? Thanks in advance. |
Follow-Up Postings:
|
| Hmmmm. My Duet dryer is almost six years old. That clicking sound is something electrical. From all the reading I have done usually what goes out in a Duet dryer is the thermistor....But I'm not sure if that causes the dryer to actually not start or just not heat. I would do post a question on this forum |
Here is a link that might be useful: Appliance 411
|
- Posted by regus_patoff (My Page) on Thu, Aug 5, 10 at 2:31
| model number ? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Laundry Room Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.