Return to the Laundry Room Forum | Post a Follow-Up

 o
Dryer vent in wall won't accomodate 4 inch pipe

Posted by snewsie (My Page) on
Mon, Jul 8, 13 at 20:15

I purchased new washer dryer to replaced the old one which was hooked up to 3 inch venting (it's a condo unit and the washer/dryer was only 1.5 Cubic feet). My husband would like to change it out to 4 inch hard aluminum ducts but it will not fit in the wall where it runs up to the attic and then out. He tells me that the hole in the attic, that you drop the run down, is in a 2x4 and can not accommodate a larger hole. ??? Any thoughts on how to get a 4 inch pipe in that wall - I've read about shaping it into an oval possibly for the wall only portion. Thanks for any thoughts...


Follow-Up Postings:

 o
RE: Dryer vent in wall won't accomodate 4 inch pipe

This Whirlpool periscope vent extends to 77" and requires only 2.5" of clearance:

http://www.homedepot.com/p/Whirlpool-29-77-in-In-the-Wall-Dryer-Vent-Periscope-4392892/202647858#.Ubp0F-e1FQg

Here's some 4"-oval "skinny" ducting:

http://www.homedepot.com/p/4-in-Oval-Skinny-Duct-Aluminum-Dryer-Vent-DAF1/203286070#.Udwnbz6DTpQ


 o
RE: Dryer vent in wall won't accomodate 4 inch pipe

Thank you!


 o
RE: Dryer vent in wall won't accomodate 4 inch pipe

Or maybe something like an adapter?? See link below:

Here is a link that might be useful: Four inch to Three inch adapter

This post was edited by jseeley on Tue, Aug 27, 13 at 19:55


 o
RE: Dryer vent in wall won't accomodate 4 inch pipe

It's a short run, but FWIW, it may be noiser AND possibly decrease the motor life on the fan as you are restricting volume..


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Laundry Room Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here