Return to the Laundry Room Forum | Post a Follow-Up

Fischer Payel Ecosmart washer

Posted by mbanward (My Page) on
Wed, Jun 4, 14 at 1:32

I have had a variety of problems with this washer but, I guess, all in all, it's been ok. But the past few days, after I do a load of laundry, the clothes are clean and they are spun properly - no excess water. However, after I remove them, water leaks from the top of the washer into the washer leaving ~ 1/4 inch of water in the tub. The washer works fine and seems to be cleaning fine although obviously I have to remove the clothes right away or they get kind of soggy. Has anyone heard of this problem before and/or have any idea of what is causing it?

Follow-Up Postings:

RE: Fischer Payel Ecosmart washer

Common problem with any washer ... one (or both in rare cases) of the water valves has gone bad, isn't fully shutting off. Could be obstructed with a bit of debris from the household water supply, such as a grain of sand.

Turning off the supply faucets when the machine is not being used will stop the leaking.

Turn off one faucet at a time to determine which valve -- hot or cold -- is the culprit.

There are several models labeled EcoSmart and you didn't provide your specific model number so I can't at this point tell you what are the part numbers for the valves. It's an easy repair and the valves are reasonable cost, $35 to $55 depending on which valve and supplier/source.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Laundry Room Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here