Return to the Laundry Room Forum | Post a Follow-Up

 o
Whirlpool Cabrio WTW6400SW3 Water leaking from bottom/ grease?

Posted by zeithammel (My Page) on
Sat, Mar 17, 12 at 13:37

Have a approximately 4 year old Cabrio Washer, that leaks water from bottom and found grease/ packing on the concrete floor. After reading the other post with similar problems: http://ths.gardenweb.com/forums/load/laundry/msg0316245815052.html, is this a simialr fix. My washer does not have a transimission judging from parts list from sears? But the parts list from sears shows the center shaft is not available. Is this because the whole tub is an assembly now


Follow-Up Postings:

 o
RE: Whirlpool Cabrio WTW6400SW3 Water leaking from bottom/ grease

There is now a kit for the bearings, without replacing the entire outer tub. Don't know the part number, although I could probably find it somewhere.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Laundry Room Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here