|
Sat, Feb 9, 13 at 1:02
| Auto sensor. I do not think the auto sensor is working on the dryer. During drying cycle the dryer continues to run and none of the lights (Damp, Dry, cool down etc light up) When I test it in level 5 diagnostice the LEDs Do chnge so I know the sensors are connected. I checked the green grounding cable to the front panel of the dryer and it is connected. Any help would be appreciated. |
Follow-Up Postings:
|
| The Drying light stays on continuously until you manually shut the machine off? As a test, run it with no clothes on Regular, Auto Sense, Damp dryness level. Does it shut off at some point? If so, how long until Off? Checked mine a few mins ago. Runs 5.5 mins from start until the Cool Down light activates. Total time to off was 9 mins. Cool down time varies, is based on the exhaust air temp reducing to 95F. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Laundry Room Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.