Return to the Laundry Room Forum | Post a Follow-Up

 o
4 Way Venting Dryers: Will the store modify?

Posted by misterz (My Page) on
Thu, Jan 7, 10 at 18:54

In researching various dryers, some state they have the ability to vent/exhaust to the sides and bottom in addition to the standard rear.

I need a dryer to vent to the left.

Who makes this modification? Is it something I need to do or will the store perform the switch? Do I need to buy a kit, etc or again will certain stores do this?

Thanks.


Follow-Up Postings:

 o
RE: 4 Way Venting Dryers: Will the store modify?

The Stores should be able to do this, if they have a Service Department,
otherwise it would separate service call ....


 o
RE: 4 Way Venting Dryers: Will the store modify?

I would say that whoever does the actual installation would do this, as part of the installation. Could be you, the store you purchase it from, or a third party service company. Check in the installation instructions to see if you need a separate kit. I did my own installation of my Asko, did not need anything else to switch the vent.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Laundry Room Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here