Return to the Laundry Room Forum | Post a Follow-Up

o
HE3 HF error

clip this post email this post what is this?
see most clipped and recent clippings
Posted by logisticky (My Page) on
Thu, Feb 10, 05 at 13:19

Hi - I have a 2 yo Kenmore HE2 that has been well behaved up until now. Today I started getting the HF error. Id stop, cancel and restart and then get it again.

I searched gardenweb and there was 1 thread on this but it is dead.

Any help out there???

thankee

Follow-Up Postings:

o
RE: HE3 HF error

clip this post email this post what is this?
see most clipped and recent clippings

I hope that you have your problem solved by now, however this happened to me last year before my machine was 7 mos old. They had to replace the whole electric panel.
good luck,
alice

o
RE: HE3 HF error

clip this post email this post what is this?
see most clipped and recent clippings

THE HE3 IS LIKE THE WHIRLPOOL DUET IS GERMAN MADE DUE TO THE STRICT SANITATION LAWS THERE CANNOT BE ANY RESTRICTIONS OF OUT GOING DRAINS WHICH MOST ERROR CODES ARE RELATED TO VERIFY THE ERROR CODE BEFORE YOU FRY SOMETHING.DONT DRIVE WITH CHECK ENGINE LIGHT ON

o
RE: HE3 HF error

clip this post email this post what is this?
see most clipped and recent clippings

Hi - if you get the HF error on the Kenmore He3 please check the screen filters where the water lines connect to the valve/solenoid assembly at the back of the machine. We took the machine apart and tested every electronic component. Finally, after running the self diagostic test, we narrowed the problem down to the hot water valve which was gunked up at the screen. The screens are easy to get at and do not require any disassembly of the case - just disconnect the water lines. The washer runs like a champ now!

o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Laundry Room Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.