|
Wed, Nov 28, 12 at 17:35
| Hi, I'm in the process of using the rustoleum cabinet transformations kit (rustic) and it's going pretty well thus far. I have 2 coats on the fronts/backs of the doors and will glaze them tomorrow. I'm wondering what the best methods are to apply the bond, glaze, and top coats to larger areas? I have a refrigerator panel as well as a wood panel that's about 3' high x 7' long on the back of our counter I would like to use the kit on too. I'm thinking the bond and top coats are going to dry so fast it may be hard to brush on. Could I use a foam roller and go over it after with a brush to give it brush marks?? Any tips or advice is greatly appreciated. Thanks |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.