Return to the Kitchens Forum | Post a Follow-Up

Franke Orca Owners

Posted by athomesewing (My Page) on
Fri, Sep 27, 13 at 17:42

Many here recommend the stainless (non-coated) grids. I was planning on ordering them, then yesterday, somewhere on one of the Franke sites I noticed that they said that the coated grids help to protect the sink.

Have those of you with non-coated grids found that they scratch the sink, or are hard on it in any way?

Thanks for your thoughts.

Follow-Up Postings:

RE: Franke Orca Owners

The non-coated grids have little plastic pieces that fit over the outside edges of the stainless, so the metal parts never touch the sink. Each plastic piece is about an inch long and there are six total, two on each side that would come in contact with the sink.

RE: Franke Orca Owners

Thank You!!!! (:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here