For inset, the 5PCF (5 piece reversed raised panel) is available for $47 per drawer front, list. (Remember that your designer discounts from list, and that's not what you'd actually pay.)The top drawer will be slab, as the minimum for a 5PCF drawer is 7 1/4" in this door style because it is a wide stile door.

For inset, you can also do a profiled 5/4" slab drawer (IODF, no upcharge) that adds additional visual interest to the drawer profile. It's what I chose for my vignette in the Milena doorstyle. It's less busy visually than a 5pc drawer front, but it's not just plain slab either. It's minimum drawer size to be used is 4 13/16", so it's perfect for adding that oomph to inset where you have the much narrower drawer panels fitting inside the face frame.

**double post removed**

This post was edited by live_wire_oak on Wed, Sep 25, 13 at 10:30

livewireoak, your photo caught my attention because I am doing a Renner door (stained cinnamon) with the same mullions and glass door that you have pictured. Is that your kitchen or a project that you designed? If so, I have more questions.

It's the vignette I designed for our new showroom.

Thanks live_wire_oak . I really appreciate the help. I need to stop back in one of the showrooms where I thought I saw a renner vanity. I could swear it was a combined vanity with drawers on the side which had 5 pc drawer heads including the top drawer. It's possible it was another brand since I've looked at so many.

Again, thanks for your answer. I wish the kd's around my area were as helpful as you.

Picture taken at a Dynasty dealer showing 5pc top drawer in the Renner door style.

Another Picture taken at a Dynasty dealer showing 5pc top drawer in the Renner door style.