I'm doing the same thing. My brother-in-law is a cabinet maker and is getting the doors for us through Decore-ative Specialties. I'll link the website below. I'm not affiliated with Decore-ative, nor have I received my doors yet, so I'm not making a recommendation -- just sharing our plans.

Good luck!

Here is a link that might be useful: Decore-ative Specialties

we do this work all the time, you could do it yourself but you have to find a quality door manufacturer, We use Conestoga wood specialties, but consumers can not order from them. You can buy doors from home depot, but you can be 99.9% certain they will not be quality. Your best bet may be to contact a door manufacturer that you want to use and see who carries their doors in your area. Let me know more about what you are looking for and maybe I can steer in you the right direction. Go ahead and send me an email if you have some questions.

mikemoore@moorescabinets.com

I do it for a living and if you are just a little bit handy you will do fine. There is a place called evans in brenham tx that I buy from when I am backed up. I make my own if I have time. I won't advertise per rules of the site. Matching the finish will be the tricky part. The only other thing to consider is the drawer fronts may be made as part of the drawer. Either make new drawers, or cut the face down to where it will go into the cabinet and mount the new front onto it if that is the case. Good luck Kenneth

We're looking at replacing our doors and drawers as well. Not sure yet if we're going to buy or if Hubby is going to attempt to do them himself. All depends on what kind of deal we can get. Right now I'm looking at a few on eBay and will probably be hunting out a local cabinet maker.