|
Tue, Aug 14, 12 at 13:45
| Okay, a little manic today but here's my next question re: prep sinks. Done an image search and found nothing thus far.
Let's say you have two base cabs meeting in a corner...3" fill on each side and all that. Now you have 24x24 of dead space in the corner. Could a little prep sink fit in that space of counter or would it be too far back to be easily usable? Is this a workable thing? |
Follow-Up Postings:
|
| My prep sink is in a corner (the sink is 16"x16") but then it is angled across the front so it is in an area that is 3'x3'. Try standing and leaning against a corner, it is very uncomfortable. |
|
| Check out this thread. |
|
| Blfenton: that's what I was worried about, but that link Marcolo (thank you!) posted shows Circuspeanuts awesome corner sink and then Viva's, too. Both with a 90 degree corner. Food for thought... |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.