Return to the Kitchens Forum | Post a Follow-Up

 o
Cabinet depth - uppers

Posted by seosmp (My Page) on
Wed, Jun 5, 13 at 10:36

Hi,

I am going with 14" deep upper cabinets in my main kitchen area.

I do have one cabinet run by the kitchen table which contains an undercabinet frig - it's next to the family room and will provide drinks/etc. and a recycling/garbage center.

The uppers on that run consist of a 33" cabinet, 36" cabinet with frosted glass, and 33" cabinet. The glass cabinet will be deeper to provide that front to back depth (since all cabinets are going to the ceiling due to PVC/electrical/etc. above them).

The cabinetmaker has the outer cabinets at 13" and the glass cabinet at 16". He originally had it at 15" deep which I was ok with. He is now suggesting 16" deep but I'm worried that this may be too deep and the doors would swing too far out.

Do I stick with the 16" as he is suggesting or go with 15"?

This may seem like a minor question/issue, but my brain is fried and can no longer function.

Thanks!


Follow-Up Postings:

 o
RE: Cabinet depth - uppers

Is it a standard 25.5" deep counter underneath (24 plus overlap)?

If you a putting crown molding at the top, a 3" jog may look better than
a 2" jog. In any case, make sure that is being considered.


 o
RE: Cabinet depth - uppers

Yes, standard depth counters.

And yes, I will have crown molding (12" basically of a flat piece then a couple pieces to make up the built-up crown).


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here