|I hope it is okay to post this question here -- it does involve cabinetry and I need to make a decision so I donât hold up the re-model any more. |
Our master bedroom does not have space for a walk-in closet. It has an 18â long x 8â high wall that had three 5â-8â wide reach-in closets with walls separating the 3 closets and 80â high doors, so it was hard to store anything on the top shelf. We had the GC demo the existing closets to get rid of the dividing walls and soffits. We will have doors that are almost 8â tall to allow easy access to the top shelf. My original plan was to have our custom cabinet makers build a 4â wide, floor-to-ceiling, center unit with drawers on the bottom and shelves behind doors on the top. (DH really likes to store a lot of his clothes folded on shelves.) On each side would be a 7â wide regular reach-in closet with bifold doors and drywall interior. We would have long hanging clothes with a shelf above and shoe storage below in one closet, and double bar hanging space in the other closet. The center unit will have flat panel doors and drawers made of rift cut oak veneer stained grey. The bifold doors would be rift cut oak special ordered through a door company and stained by cabinet guys (cabinet guys are not used to building 1-3/8â thick doors). I am a bit nervous about coordinating the cabinet guys doing the center unit and our GC installing the bifold doors (cab guys wonât do it) and having it all fit together correctly.
I really love the doors on our pantry cabinets with the tall narrow glass windows (picture below; we plan to add textured or frosted Solyx film to obscure the contents). Each pantry door is 19â wide. I recently had the crazy thought that something similar might look good in our bedroom. Instead of having two 7â wide reach-in closets, we could have four 42â wide x 28â deep wardrobe cabinets with cabinet doors like on our pantry instead of bifold doors. Two units would be for long hanging and 2 would have double rods. The center unit would remain the same. Adding textured or frosted glass panels would break up the 18â wall of grey wood, which could be good or bad depending on your preference. We also planned on pocket doors with glass panels for the master bathroom, which faces the closet, so we could use the same film on all the glass doors. DH worries about the loss of storage space due to all the cabinet walls (6â total width with 8 Â¾â cabinet sides). I know it will cost more, but not sure how much (I donât want to ask for a quote until I get more opinions about whether it is even a good idea).
If you were a potential buyer, which would you prefer: Option 1 - regular reach in closets with bifold doors, or Option 2 - narrower custom wardrobe cabinets.
Interiors of cabinets for Option 2 (there would be 2 of each of these):
Our pantry doors (picture with textured or frosted glass and 1-2â wider per door):
Cabinetry in color similar to this:
Option 2 doors would look similar to this, with frosted/textured glass instead of mirror:
I want to use ROTS for shoe storage. They could attach to the cabinet walls in Option 2, or I could ask the cabinet guys to build a free-standing unit for inside the closet in Option 1.
|I just looked at these options for a room that I am converting to a walkin. I ended up using elfa because I felt it gave me more flexibility and hanging space. You should check out the Organizing your home forum. There are a lot of discussions about using cabinets.|
|I am not sure why my photobucket pictures disappeared overnight. They showed up when I posted yesterday. Trying again. |
Option 1 exterior sketch:
Option 2 interior sketch (there would be 2 of each of these configurations):
Pantry doors that Option 2 wardrobe doors would be modeled after, with frosted or textured glass:
|Carolmka, I will try searching the Organizing forum, thanks. I considered Elfa because it is a very nice looking, flexible system. We know from experience that we want half of the hanging space to have 1 shelf and rod and half to have 2 shelves and 2 rods, and it will cost less to have our cabinet maker or GC build and install the simple elements we want.|
Return to the Kitchens Forum
Information about Posting
- You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
- Please review our Rules of Play before posting.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
- After posting your message, you may need to refresh the forum page in order to see it.
- Before posting copyrighted material, please read about Copyright and Fair Use.
- We have a strict no-advertising policy!
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
Learn more about in-text links on this page here