Return to the Kitchens Forum | Post a Follow-Up

Can undermount sink be changed?

Posted by janesylvia (My Page) on
Tue, May 14, 13 at 14:54

Can undermount sink be changed? Thanks.

Follow-Up Postings:

RE: Can undermount sink be changed?

The short answer is: not likely. The long answer is that if you search really really hard and find a new sink with either the exact same cutout (unlikely) or a larger cutout, you can maybe get a granite fabricator to do it. BUT, they likely won't warrant "shaving" off such a small amount of granite without potentially breaking the slab.

RE: Can undermount sink be changed?

It depends on a few things.
If the sink is epoxyed to the countertop you're going to have a rough time separating them.
If the sink is siliconed to the countertop it'll be easier to separate the two.
You'll need to make sure that the sink flange is clear of the interior cabinet walls so that once separated, the sink will be able to drop into the cabinet.
Also, as "hollysprings" said you need to figure out if your cutout will accommodate your new sink.
So, it may be do-able but you'll need some luck on your side.

RE: Can undermount sink be changed?

We were told when we bought our undermount sink in our Formica countertop, that if we ruined the sink somehow, it could be replaced by a surface mount sink. Maybe check with a plumber.

RE: Can undermount sink be changed?

Hello Janesylvia, In most cases an under mount sink can be changed. As mentioned above, the easiest way is to use a top mount sink. I had a customer call yesterday looking for a specific size sink to replace his existing sink. I did a Google Image Search using the dimensions required and a description of the sink and found him a sink in less than 3 minutes. He had been looking for days. Maybe you could try doing that.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here