Small soft bumper 'dots' are available from Rockler

Nothing stops the noise except Blumotion. Ask me how I know. :) I bought them for about $2.50 each online (I'd have to look for the link) and installed them all myself in under an hour with just a Dremel and screwdriver.

Thanks for your suggestions. Do you use the Blumotion on doors and drawers? Do they attach to your existing doors?

Do you remember where you found them online?

I will look at Rocker too.

The felt pads at Lowe's were worthless. Peke

Here's ones that Rockler has. Just attach them to your cabinet frame. Not sure if these will work for drawers.

Here is a link that might be useful: Blumotion Hinge Adapter

This post was edited by gpraceman on Sun, May 12, 13 at 12:30

Thanks, so it goes on the opposite side of the hinge, right?

Hey, there are no stupid questions.....right?

ð peke

Same side as hinge.

Or, get the gel stick on dots rather than the hard plastic stick on dots.

What is your budget? cents or dollars per door?

Ok, I can get the blumotion for doors, but what about drawers? All of my lowers are drawers.

No set budget, but don't want to spend too much. Peke

What type of drawer glides do you have? Side mount or under mount? Full extension or 3/4 extension?

You might be able to just change out to soft close drawer glides. If you have a lot of drawers, that can get expensive fast.

I did a quick web search and found this system that looks interesting. You mount the clip on the side of the drawer and the closer unit on the side of the cabinet.

{{!gwi}}

Here is a link that might be useful: Soft Close Systems

I had looked at those also, but they will only work on faceless cabinets. I have full extension side mounts.

Oh well. I guess I will use the gel bumpers. Thanks for all the suggestions. Peke