Return to the Kitchens Forum | Post a Follow-Up

Stone Fabrication Question

Posted by wolfgang80 (My Page) on
Wed, Apr 3, 13 at 19:08

I'm meeting with our stone fabricator this weekend to discuss the details of our job and give them a deposit.
I have a question about the edge finishing. We are going with an eased edge. Does the edge that runs along the range (there's a 1/8" gap between the range and cabinet) get an eased edge? I figured that the edges that run along the walls don't get the eased edge, but I'd like to know what you've done.
I'd rather hear from y'all than rely on the fabricator to tell me what most people do.

Thanks so much.

Follow-Up Postings:

RE: Stone Fabrication Question

It gets a polished edge. Slightly touched with the sander /polisher so it's not sharp. Probably not quite eased edge.

RE: Stone Fabrication Question

Thanks, Kent. Do the edges abutting the backsplash get that same polished edge?

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here