Shop Products
Houzz Logo Print
jeri

Craft Art Black Walnut & Waterlox

jeri
12 years ago

Thanks to all of you, my husband is *very* impressed with me. :-)

Thanks to you, we ordered a Craft Art Black Walnut DIY counter. I put on 3 coats of the original and 1 coat of the matte finish - just as all of you recommended in various threads. I also followed advice I read here and used a 4" wide foam brush to apply the Waterlox - I used a new one each time. Folks - this could not have been easier!

I did lightly sand in-between coats with a sanding block I purchased at Home Depot, like the one in the picture below. This came in the 320 grit that Wood Craft recommended. I then ran a tack-cloth (also Home Depot) over the wood and applied the Waterlox. I let it dry at least 24 hours in-between coats - closer to 48 really.

This countertop is drop-dead-GORGEOUS! As stated, my husband is totally impressed. But I did give all of you the credit - I told him I completely trust the input from this forum. :-)

Comments (11)