Return to the Kitchens Forum | Post a Follow-Up

 o
Anyone use general finishes antique walnut gel stain?

Posted by misawachick5 (My Page) on
Sat, Mar 23, 13 at 13:38

I've seen lots of posts about gel stain in java. Has anyone out there used the antique walnut gel stain color? If so would you please post before and after pics?

I'm wondering if it might be an option for us to get away from the orange in our existing cabinetry. We're thinking they're maple. Home is 14 years old. Thanks so much!


Follow-Up Postings:

 o
RE: Anyone use general finishes antique walnut gel stain?

Same question here. I used Java, but DH thinks it's too dark.


 o
RE: Anyone use general finishes antique walnut gel stain?

I'd like to see pics too. I'm thinking of doing the trim in our kitchen and family room (which is a reddish oak color) with it. I was planning on painting it, but my husband would prefer to stain it.

I've used the GF java on our bathroom cabinets and on our stair railing, and really like working with it. The java would be too dark for the trim in our home though. It looks black to me unless the sun is directly hitting it.


 o
RE: Anyone use general finishes antique walnut gel stain?

Starting with it today for bath. Keeping my fingers crossed.


 o
RE: Anyone use general finishes antique walnut gel stain?

Master bath cabinet door before Antique Walnut General Finishes gel stain. It's a honey oak color. I stripped and refinished the kitchen with Walnut stain (not gel stain) last year and I still think it is too red so I'm trying gel on the master bath.


 o
RE: Anyone use general finishes antique walnut gel stain?

After 1 coat of gel stain. I was a bit intimidated because of the raised panel doors but if I do multiple light coats, I think it will work. Beauty part about it is, skipping the stripping. Wash the wood, let it dry and lightly sand first. I've refinished 2 kitchens stripping cabinets down and all before so if this works, I may do the other two baths!


 o
RE: Anyone use general finishes antique walnut gel stain?

You can go "darker" with gel stain easily ... my original tests were with Georgian Cherry, which was too red, so we added Java to the mix.

If you use a medium true brown, lightly applied instead of the Java painted on in thick coats, you will shift the color away from the reddish maple to a browner color.


 o
RE: Anyone use general finishes antique walnut gel stain?

How are you applying the gel stain? I found if I used a cheap little craft store paint brush to do the inside parts of the panel it worked better then using a foam brush or sock method, which tended to get globs of stain that were hard to spread out.

I did the crevices first with the small brush, and then the rest with either sock or foam brush. This was with the Java color.

Thanks for trying the walnut stain, and then posting your results. I think it is looking better already. Please continue to post after each coat. It would be so helpful!


 o
RE: Anyone use general finishes antique walnut gel stain?

OOH yes, please keep us posted! It's looking good !


 o
RE: Anyone use general finishes antique walnut gel stain?

OOH yes, please keep us posted! It's looking good !


 o
RE: Anyone use general finishes antique walnut gel stain?

Hi Deedee,
any updates on the GF Antique Walnut?


 o
RE: Anyone use general finishes antique walnut gel stain?

Bump .... Would love to see photos of the antique walnut gel stain if you have them


 o
RE: Anyone use general finishes antique walnut gel stain?

My attempt using GF gel stain was not a success. I'm not sure what went wrong, but the second coat was a disaster. I'm willing to take the blame. I ended up starting over with another GF product, their oil stain.

However, I gotta say that Brown Mahogany gel stain is the most gorgeous color. It doesn't look red (I guess that's why they call it "brown"). It's not too dark. Over golden oak it had a beautiful craftsman look.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here