Return to the Kitchens Forum | Post a Follow-Up

 o
Please help...how big should the gap be between range and cabinet

Posted by dutchaccent (My Page) on
Sun, Feb 10, 13 at 15:43

Hello everyone,

I would appreciate your help. I received the "final drawings" from my cabinet maker and he allocated a 1.5 inch gap on each side of my freestanding range, apparently because he figured a 1.5 inch counter overhang on each side of the cabinets. However, that seems excessive to me. I think the gap between the cabinets and the range will look like a mistake plus I think it will gather a lot of dirt. May I ask those of you who have a freestanding range, how big the gap is between the range and the cabinets? (I realize that the granite can be cut and installed so that it is closer to the range, but I still think that it will not look right...)

Thanks in advance for your answer,

Toine in CT


Follow-Up Postings:

 o
RE: Please help...how big should the gap be between range and cab

Hi Toine,

We have a slide-in range, so I guess technically that is not a free-standing? There is an edge on the stove that fits over the granite. (I think that for free-standings you can buy some sort of piece that covers that gap between stove-top and granite) However, just checked, and there is barely 1/4" between sides of oven and cabinets. Nothing ever gets in there, or if it does, I'm oblivious! LOL I would check the specs on your range to see how close you can bring the cabinets, and bring them as close as is possible.


 o
RE: Please help...how big should the gap be between range and cab

I have sort of the opposite problem,in that I have only 73" on my range wall, 30" for the range, 33" for the corner cab, leaving space for a 9" cabinet, 0.5 inch for door swing, and 0.25 inch gap on either side of the range. My KD assures me that this is plenty (I was worried that I wouldn't be able to ever slide the range out again for cleaning or repairs)
I have to trust him, he's had many years of experience.


 o
RE: Please help...how big should the gap be between range and cab

I currently have a free standing range w/ a Formica countertop. We are in the process of remodeling & replacing all appliances & countertops w/ granite. One of the biggest complaints I have had w/ the current range & countertops is the space between the range & Formica. Yes, it does gather food & I do have to clean it periodically. I would look at the kit that will overlap onto your granite. We are replacing our range w/ a slide in range that has a lip & will prevent food from dropping down in-between counter & appliance.


 o
RE: Please help...how big should the gap be between range and cab

I currently have a free standing range w/ a Formica countertop. We are in the process of remodeling & replacing all appliances & countertops w/ granite. One of the biggest complaints I have had w/ the current range & countertops is the space between the range & Formica. Yes, it does gather food & I do have to clean it periodically. I would look at the kit that will overlap onto your granite. We are replacing our range w/ a slide in range that has a lip & will prevent food from dropping down in-between counter & appliance.


 o
RE: Please help...how big should the gap be between range and cab

Between my range and cabinets there is about 1/4 inch, if that. My counter top is very slightly over the edge of the cabinets and then there is a very slight, like paper thin, gap between the counter and the range. 1 1/2" gap between the cabinet box and the range seems like a lot. Think of the drawer space you're losing. Counter overhangs are usually between 1" and 1 1/4" at the front. I don't suppose you're reading the measurements as 1.5" when in fact it's .15" ? I would definitely question this.


 o
RE: Please help...how big should the gap be between range and cab

The edge of our granite is flush with the side cabinet next to the stove. It's very close - the white thing sticking up is a business card. I think I could have put 2 cards in the gap, but that's about it. The fit is tight, but the stove can be readily moved in and out.

 photo stovegap_zpsbd7ef6b3.jpg


 o
RE: Please help...how big should the gap be between range and cab

And just by chance, I saw a great photo posted by ratrem in another thread that is a great photo for exactly your question:

Think how terrible that would look with a 1.5" gap! Like blfenton, I'm wondering if you read it incorrectly - hope so.


 o
RE: Please help...how big should the gap be between range and cab

Ask your cabinet maker to give you a 1/4" over the range dimensions. Then when they template for you counters, have them go flush, or just proud of that. ...much cleaner look, see the last photo


 o
RE: Please help...how big should the gap be between range and cab

Like everyone above says, the cabs should be tight to the range. Our kitchen cabs are within 1/8" of the range on each side and the granite is flush.

However, it is possible that your cabinet maker really does mean 1.5 inches ... because that did happen to us recently with a new build townhome we bought. Never occurred to me in a million years that this was even possible, but here that's what the builder actually gave us and then tried to pass off as 'standard' in our PDI. Needless to say I threw a complete and total hissy fit lol, and they did come back and add filler panels in the days after we closed. I'll show you pics of it with the gap so you can see just how completely ridiculous it looks.

Here's our home kitchen and what the flush cabs should look like:

 photo DSCN3901_zpsf445aac4.jpg

And here's our townhouse kitchen when at closing. Whatever you do, ensure your cabinet maker does not copy this look. :-)

 photo DSCN4041_zps3bcc0ba3.jpg

 photo DSCN4044b_zpscd265419.jpg


 o
RE: Please help...how big should the gap be between range and cab

Like the others said, 1.5" on each side is ridiculous. I used 30 1/8". I think you will find this discussion by various anonymous pros interesting and relevant.

Here is a link that might be useful: Recommended appliance cutouts


 o
RE: Please help...how big should the gap be between range and cab

The installation manual for your range probably specifies what size gap to use. Wolf recommends 36 1/4" for a 36" range. While granite counters typically overhang the front edges of cabinet boxes by 1.5", at the opening for the range the stone should be flush to the sides of the cabinets.


 o
RE: Please help...how big should the gap be between range and cab

I made my layout for an interference fit in all cases. If it is a friction fit, there's no room for bugs, spills, etc.

Casey


 o
RE: Please help...how big should the gap be between range and cab

I am a cabinetmaker and the standard is 1/8 to 1/4. I use 1/4.

Travis Alfrey
Pinehurst, NC


 o
RE: Please help...how big should the gap be between range and cab

Thank you all for your answers. It was my mistake. Because the cabinet maker is making full overlay cabinets, he planned for a 1.5 inch filler on each side of the range and the fillers will be incorporated into the cabinets. I'm sure he will do a beautiful job. I panicked for nothing. It must have been the stress from all that snow here in CT that made me not study the drawings better. Sorry...


 o
RE: Please help...how big should the gap be between range and cab

Dutch-I too was wondering about this so your frenzied look at your cab measurements did help someone.

I hope the snow hasn't completely buried you, but I hear there is more on the way. : (


 o
RE: Please help...how big should the gap be between range and cab

3" seems like an awful lot of real estate to waste on filler! I have full overlay, and used, as I said above, 30 1/8" Now I must admit that one of my drawers needed careful adjusting to avoid rubbing on the range. However, I would have had to given up my 6" spice rack to dedicate 3" to filler on the range run!


 o
RE: Please help...how big should the gap be between range and cab

1/4 inch total clearance, so 1/8 inch on each side.

We pull the range two or three times a year for cleaning.

Usually there is not very much there.

It is a real PITA since the PO put down cement board and thick tile, locking in the DW under the granite counters (DW since cut apart to remove and replaced with a handicapped height unit) and leaving a Viking stove with a 1 inch step to slide it out (I remove all the knobs and door and then tip it out).

This post was edited by brickeyee on Mon, Feb 11, 13 at 12:19


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here