|
Mon, Feb 4, 13 at 14:54
| We are building an Island/Table with a granite top. The granite top is 74" long and 46" wide, 2cm thick. The cabinet is 24" inches deep and runs the width of one end of the granite which leaves about 44" of over hang for the table. We have an oak pedestal we are using for the centre of the overhang and setting the granite on a sheet of plywood that runs the full underside of the granite. Is this strong enough to support the granite without legs on the corners? Im hoping not to have legs. |
Follow-Up Postings:
|
| I'm having trouble visualizing your layout. So is your cabinet is 24" x 74" or 24" x 46"? Do you mean 22" of overhang per side, or 44" of overhang on one side? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.