|
Sun, Feb 3, 13 at 11:35
| So we're trying to do a small project refreshing our kitchen and we wanted to replace the existing cabinet pulls from our kitchen cabinets. Turns out we didn't realize that the faux cabinet panels under the peninsula countertop and on the sides of our old oven are glued on WITH the cabinet pulls screwed on to them. There is no way to unscrew these cabinet pulls from anywhere so how do we replace them other than literally sawing of the faux panel and then unscrewing the handle and putting the new ones in? Help??? |
Follow-Up Postings:
|
| That's a toughie! Short of a saws-all (reciprocating saw), which would damage a lot, I think, I'd tape everything off and spray paint them to match your new hardware. It's fine to have different hardware different places. (See budzillion pictures on this board) I think the finish is what would tie them together. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.