|
Tue, Feb 26, 13 at 6:31
| The cabinet hardware goes on soon hopefully and I want to "try" the position before I commit. Is there some clever way to temporarily glue/ mount the hardware to try. Mine are cast iron bin pulls and sort of heavy. |
Follow-Up Postings:
|
| Double-sided sticky tape! Can get at Lowes or Home Depot or your local hardware store. It's sturdy enough to affix sample tiles to drywall. |
|
| We printed out sized copies of the handle photo from the mfr website and taped those onto some of the drawers. We also had bin pulls, and were trying to see how to place them on a stack of drawers (shaker cabs w slab tip drawers, rails on bottom drawers. |
|
- Posted by fouramblues (My Page) on Tue, Feb 26, 13 at 8:14
| I used Fun-Tak with rather heavy pulls. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.