We just did this in ORB so that the disposal and main sink would match and both have a strainer. We could not find what we wanted directly for the WasteKing either.

This is tricky but it can be done.

It sounds like you have a stopper and flange picked out but ours were by Cucina. They are in metal finishes only, however, from PlumbingSupply.com [http://www.plumbingsupply.com/cucinaaccessories.html]. Anything that fits the three-bolt InSinkErator mount should work.

You will also need parts from the InSinkErator QLM-00 QuickLock Mount (Do a quick search for various dealers. These parts are also available separately from plumbingsupply.com. See last item.) You won't need the stopper or strainer flange.

The Anaheim (WasteKing) #3101 3-Bolt Mount Adapter Kit brings everything together. (Do a quick search for various dealers.)

and a #5298 flange body for an InSinkErator from PlumbingSupply.com [http://www.plumbingsupply.com/insinkeratorpartsbadger5.html]. This does not come with the mount since it is part of the disposer.

This getup will add about 3/4" to the depth of the disposer throat but the adapter is a rubber ring so it makes the assembly a bit quieter. Also since it will let the disposer move a bit more, make sure your drain lines can handle it. You may be able to find a complete defunct InSinkErator as a donor for the ISE parts.

Hmmm. Thanks so much! It sounds easier to cancel my order for the Waste King and get an Insinkerator.

Does Waste King still make dishwashers? I have an old stainless steel one the still works perfectly, and would buy anew in a heart beat, but thought them no longer available?