|
Sat, Sep 11, 10 at 2:35
| We are in the process of a kitchen remodel and just had the new window installed. In the top left hand corner of each window pane, it appears the inside is not finished. There is some sort of gray lining covering the metal area, but stops short at the top left hand corner. There is a screw sticking through and the bare metal with the date and some other numbers stamped on it. Is this normal for Milgard windows - I think its the Tuscany Milgard window. Our previous window was completely finished inside, but it was not a Milgard. The installer says it is normal, but it just doesn't seem right to me. We are planning to install some more windows, but will have to look around and possibly go with another brand. I tried posting a picture, but was unable to do so - I got a message that the file was too large. |
Follow-Up Postings:
|
| If it's not too late and you haven't already done so, I suggest posting this on the "Discussions" side of Kitchens. This is the "Gallery" side that's more for finished kitchens and the like. The Discussions side of Kitchens is for on-topic discussions concerning kitchen remodels. You will most likely get many more responses over there. Good luck! |
Here is a link that might be useful: Read Me If You're New To GW Kitchens!
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.