|
Sat, Jul 21, 12 at 13:16
| Hi all, our Valley gold vein honed marble countertops were just installed a week ago. The installer said he was using SB Professional sealer and left enough for us to give them a second coat. Water seems to bead up but it always leaves a watermark. The mark will fade, but now we are seeing a few oil spots. Can you advise me on two points please? How to remove the oil spots? And, can I reseal with 511 now?
Thanks so much! |
Follow-Up Postings:
|
| I would remove the spots first or you will seal them in. First off don't panic; there are several solutions. You can by oil remover made for counters. Or mix baking soda and water into paste, put on the spots, put cling wrap over them and leave over night. Next morning clean up with dishsoap and water, repeat if nessiary. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.