|
Thu, Feb 14, 13 at 20:35
| The kitchen designer stated that the end panels for the fridge should be a minimum of an inch and a half. Vs 3/4. Is there a right or wrong answer. |
Follow-Up Postings:
|
- Posted by KentWhitten (My Page) on Sat, Mar 23, 13 at 14:15
| No, not really. A 3/4" end panel is implying an edge banded piece of 3/4" panel, which yes, tends to make it a little flexible. The 1-1/2" would tend to imply a face frame, which would make that more stable, or rigid. It may have something to do with your cabinet line. It may or may not come with what you are requesting. Euro cabinets are more likely to have the 3/4" panel only, but not always. Not sure if a face frame system would have a simple 3/4" panel though. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.