Return to the Kitchens Forum | Post a Follow-Up

 o
Range hood - Miele DA 3480

Posted by iyhsvon (My Page) on
Tue, Feb 25, 14 at 18:23

We're looking at hoods to put above a 30" BlueStar RCS. The problem is that we don't have much room between where the burners will be and the bottom of the cabinet that's immediately above them (32"). As a potential workaround, we've been looking at the Miele DA 3480 (625 CFM), which is one of their in-cabinet models. Does anyone have experience with this particular hood? So far, I haven't been able to find any reviews (which is somewhat concerning).

Here is a link that might be useful: Miele DA 3480


Follow-Up Postings:

 o
RE: Range hood - Miele DA 3480

If it's not too late and you haven't already done so, I suggest posting this on the "Appliances Forum". This is the "Gallery" side of the Kitchens Forum that's more for finished kitchens and the like. The Appliances Forum is for on-topic discussions concerning kitchen appliances. You will most likely get many more responses over there.

Good luck!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Kitchens Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here