|
Fri, Aug 12, 11 at 19:23
| Hi there... We are having a nitemare kitchen experience. Our kitchen has Serious issues We went with 24 inch lowers but before installation we noticed the sofits were 27. So we ripped out the sofit... 9 inch ceilings now The cabinet people helped us out and raised corner angled cabs to 45 and a half inches... 15deep... staggering sizes and depths They also raised the et center as well,.. the others stayed at 39. now we find out that the stove vent goes to the ceiling and rather than raising that area to the ceiling and have three different levels in just 10 feet of space on that wall we are thinking of making them all 45 inches with 7 inches of crown. Why don't I see 45s being done anywhere?...ps the cabinets are made We are trying to fix this with least amount of money :)
Signed desperate in the windy city |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Kitchens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.