Return to the Heating & Air Conditioning Forum | Post a Follow-Up

 o
Is it really the problem of Control Board or else?

Posted by chueh (My Page) on
Thu, Dec 27, 12 at 22:35

3 weeks ago, suddenly, the heater stopped working. A technician checked everything and told me that the control board had some glitch. He suggested me to replace the entire unit and the furnace, because Haier did not make the control board anymore. He pushed a button next to the board and did something else. Then, the heater was working again. He urged me to change the unit as soon as possible, for he was afraid the temporary fix would not last long.

Last night, around 9 PM, the air coming from the vent gradually becoming cooler. It took about 20 minutes for the warm air became cool air.

This afternoon, I pushed the button the tech did before. Magically, the heater worked again after that.

Tonight around 9 PM, the air from the vent started to turn cooler air again, as that of last night. Last night and tonight, the temperature reached down about 34 degree at 9 PM. I am starting to wonder if the heat becoming cool air has anything to do with outdoor temperature, or mainly the problem from the control board. Perhaps it's coincidence, but can anyone shed some light with me?


Follow-Up Postings:

 o
RE: Is it really the problem of Control Board or else?

I highly doubt the outside temperature is causing your furnace not to operate.

How old is your furnace? You should be able to find a replacement board. Perhaps the tech was more interested in selling you a new furnace instead of replacing the board. Trying calling another tech.


 o
RE: Is it really the problem of Control Board or else?

thanks for the reply. 7 years. Yes, I have tried finding the board instead. Just found one


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Heating & Air Conditioning Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here