|
Tue, Nov 27, 12 at 14:45
| I have a Trane GAS/ELECTRIC AC Unit, ycc030f1m0bb, that has an LED warning of 6 flashes, and it means "flame rollout switch (FL) open" I have checked the flame valve that open and closes it (ON/OFF) and I do it either way and after resetting the AC, it turns back on but the 6 flash happens again, the blower kicks on and I guess after is doesn't sense heat it turns back off, I wonder if its a board issue or a sensor issue or just maybe a cable connection issue, I know there's gas because y gas stove is working and I'm good on that bill, I did just fix a Heat Exchange issue. but not sure why is not working. Thank You Jaime |
Follow-Up Postings:
|
| "I did just fix a Heat Exchange issue. but not sure why is not working." Who replaced the heat exchanger on the furnace? |
|
| It had holes, so I replaced it, but I don't see a reset switch for the burners. |
|
| I think I found the answer on this Video ( http://www.youtube.com/watch?v=5BiVj8R7BOc ).. Will test today to check. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.