|
Sun, Nov 2, 08 at 8:05
| I bought a Dayton Radiant Tube Heater (Model #7E258)for my garage. The manual talks a little about the thermostat but it really doesn't explain in detail where to wire it into. I was hoping that someone might have one of these heaters or one similar that could help me with wiring the thermostat. Any help you can provide would be greatly appreciated.
Thanks, Mark |
Follow-Up Postings:
|
| That type of heater requires a line voltage, 120v heating T-stat, like one for electric baseboard, or if you wish to use a 24v stat for better accuracy or setback, a powered isolaton relay will be required. Reverberray makes daytons heater (Graingers) |
Here is a link that might be useful: Wiring on page 18
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.