Return to the Heating & Air Conditioning Forum | Post a Follow-Up

 o
Overflow circuit not working

Posted by eddiemarcano1 (My Page) on
Tue, Sep 17, 13 at 21:27

I tried to manually push the overflow switch open and the AC does not turn off. I check the circuit and looks good but for some reason I still getting 24VDC at the thermostat key pad while holding the overflow switch open.
Could the little board (relay) be bad


Follow-Up Postings:

 o
RE: Overflow circuit not working

Nope. The switch is old school,it's either open ( if pump fails) or closed ( when water level is normal in tank). You either have a defective switch or it has been by-passed.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Heating & Air Conditioning Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here