|
Sun, Aug 14, 11 at 18:18
| My American Standard Heritage 11 Model # 2a6h1030a1000ab vibrates. I believe that it is the fan motor or the fan blade. I would like to isolate the problem before I call for repair. Is there a way to turn off the fan motor while the compressor is running. It only has to run for a few seconds however, I do not want to damage the compressor, etc.......
Thanks. |
Follow-Up Postings:
|
- Posted by heatseeker (My Page) on Mon, Aug 15, 11 at 15:34
| First turn off the power, read the schematic to unhook fan motor then make sure all the wires are clear then wear some rubber gloves then turn power on, then listen and see if you hear anything unusual. Don,t hurt yourself this can be very dangerous 240v high voltage. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.