|
Sun, Jul 10, 11 at 23:09
| I want to replace my 2 1/2 ton ac unit with a 4 ton. Will I have to replace the duct work, etc. in order for this to work? |
Follow-Up Postings:
|
- Posted by tigerdunes (My Page) on Mon, Jul 11, 11 at 8:18
| Haflinger Yes, you should scrap old ductwork and install new correctly sized and insulated properly. You will also require a matching new furnace correctly sized with a 4 ton rated blower along with matching evap coil for the new 4 ton condenser. Correct sizing and a completely matched system is mighty important. IMO |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.