|
| I have run a 3/4 PE line to my 175,000 BBQ and am using a 3/4 inch riser where I come out of the ground to hook up to my 3/4 inch gas supply line.
Now I do not understand and hope someone can explain it to me. I needed the 3/4 inch line to supply the gas to the bbq and am using a 3/4 full body shut off valve at the sourse. The thing I do not understand is this: Why does a 3/4 inch PE stab fitting riser have 3/4 inches all the way except the end that you hook up to the sourse 3/4 line. At this end of the riser it is only 6/8 inches not a full 3/4 inch like the stab fitting end and the rest of the riser pipe. Will that not defeat the 3/4 inch line all the way or is there something that I do not understand? Thanks |
Follow-Up Postings:
|
| 6/8 is 3/4 The unit is 3/4", just the body is bigger than the 3/4" threads. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.