|
Mon, Jul 16, 12 at 13:48
| Sorry for all the beginner questions! |
Follow-Up Postings:
|
- Posted by tigerdunes (My Page) on Mon, Jul 16, 12 at 16:23
| A few ideas without confusing you. 1.good well thought out design 2.correct sizing depending on amount of air to be moved 3.adequate return properly located for best airflow 4.prefer galv ductwork sealed properly to minimize leakage 5.do not care for flex although supply runs are acceptable; suggest check code for your area 6.good insulation of ductwork R8 depending on location 7.minimal damper controls These are just some ideas; I am sure others can add to the list. IMO |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.