|
Wed, Jun 22, 11 at 16:56
| We just built a house and I need to replace the filter of our Geothermal unit. I have e-mailed the manufacturer to find out what we should use, however, they just said to use the same type of filter that the unit came with. I have looked everywhere online and cannot find a 16 x 30 x 1 fiberglass filter except for a company that makes a PDA type (here is what they say: Disposable panel filters are rigidly constructed using a progressively dense PolyStrand� media to maximize dust holding capacity. Two metal grids are thermally bonded to the internal sides of a heavy-duty, one-piece craftboard frame to maintain the media's integrity under adverse operating conditions)
Does anyone know if that will work or if I should get pleated filters instead? Thank you! |
Follow-Up Postings:
|
- Posted by weedmeister (My Page) on Mon, Jun 27, 11 at 15:33
|
- Posted by airstarsolutions (customairfilters@gmail.com) on Mon, Jul 4, 11 at 11:54
| Pleated filters are the easiest to find , offer good filtration of smaller particles helping you to maintain a clean coil...go pleated (MERV8) and change montly. |
|
- Posted by Jeff Paula(formiga17@gmail.com) onMon, Sep 19, 11 at 10:04
| I recently bought a home with geo thermal heatling I'm experience problems with te water coming into the house via a filteration system. IT becomes necessary to bleed the water filtering system to remove sediment (it appears to be a fine mica) after removing it the system will run for 6 weeks then shut down again. Is there a specific watering system I should use |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.