|
| I've been doing ALOT of reading and research on this subject and can't find a definitive impartial opinion on which filter to use.
My situation : 2 year old Goodman 95% furnace and a/c unit. No allergies or excess dust buildup in the house...I just want the air handler to run as efficiently as possible with the least restrictive air flow, but don't want to lose mechanical efficiency by having dust build-up on the coils. Will a basic ‘el cheapo’ fiberglass filter changed every month be adequate in preventing dust buildup inside the unit? What’s your opinion? thanks! P.S. as far as air filtration goes for pollen/dust etc…I’ll be using a 20" box fan with a 20x20 pleated air filter attached :=) |
Follow-Up Postings:
|
- Posted by creek_side (My Page) on Wed, May 5, 10 at 8:07
| The fiberglass filters will stop small rocks, but that's about all. On the other hand, a lot of HVAC pros warn against using the 3M Filtrete brand pleated filters, claiming that they are so restrictive that they damage the air handler blower. I settled for a happy medium, pleated filters that are not as restrictive as the 3M units, but are much better at trapping dust than any fiberglass unit. Home Depot and Lowes carry them. |
|
| fiberglass filters are next to worthless for dust. |
|
| So I take it that you believe the fiberglass filters don't really protect the internal workings of a furnace/AC from anything smaller than a bug? |
|
- Posted by airstarsolutions (My Page) on Fri, May 7, 10 at 22:45
| If you have a standard size, MERV7 and MERV8 efficiency filters will work just fine. If you have a custom size, Pleated MERV8's are also available in a new 'reusable' format. |
|
| I use a Honeywell 4" MERV10 pleated filter FC40R1078 which has a lip and fits into many return ducts designed for standard 1" filters. I'm getting a full year's use out of them in So. Louisiana, for about $4/mo. Much less restrictive than the 3M filters, and they're sturdy enough that they don't make crinkling noises when the blower kicks on. |
|
| I found the perfect remedy years ago. I cover the fibreglass filter with the black filter material they use on window AC units. The fibreglass one provides the support needed and the black filter does a superb job of filtering. Haven't had to clean a coil yet, after 15 years. The black filter will set you back about $1. Now go do it. |
|
| creek_side..........whats the brand you are referring too?.............thx |
|
- Posted by creek_side (My Page) on Mon, Jun 14, 10 at 9:57
| Flanders NaturalAire. |
|
- Posted by Donna Geary(bearpaws@nightowl.net) onSun, Jan 30, 11 at 13:52
| I am asking about using a 3M pleated dust reduction filter. After buying and installing this filter ..nine days later our furnaces started acting up. We replaced three sequincers. Finally the they checked our filter ...only to be told that the pleated filter should not be used on our furnace. That we should use the fiberglass filter. The pleated filter was restricting to much air flow.. We changed and everything is working properly now |
|
| The fact the filter is pleated does not cause excessive restriction. The pleating increases the surface area which is an attempt to make it less restrictive. The 3M filtrete filters are known to be restrictive. The Naturalaire filters are pleated and not as restrictive. The fiberglass filters don't do a very good job. I would not add additional filtering the the fiberglass filter without knowing how much added restriction is being added. |
|
| I use the Flanders filters, too. Buy them in a 3 pack at Home Depot. They say they last for 3 months, but I leave my air handler fan running 24x7x365 (cleans the air, helps balance temperatures) so I replace them monthly. For some years I used the fiberglass filters. They would stop some dust, but I think it was just luck. I've noticed my house is significantly less dusty now that I'm using the Flanders filters. I have, however, had a problem with the Flanders filters. If the filters are even a tiny bit oversized, they jam and I can't get them into the filter box. Whenever I buy filters I have to measure them very carefully. |
|
- Posted by roberthaney1 (My Page) on Fri, Aug 10, 12 at 18:41
| FIBERGLASS FILTERS ARE ALMOST WORTHLESS.HVAC PEOPLE RECOMMEND THEM BECAUSE OF LOW AIR RESISTANCE.PLEATED FILTERS ARE MUCH BETTER BUT STAY AWAY FROM ANYTHING WITH A MERV RATING HIGHER THAN 8. THEY ARE TOO AIR RESTRICTIVE AND CAN CAUSE PROBLEMS WITH A/C COILS ICING UP OR HEAT EXCHANGERS BURNING UP. MAKE SURE THE PLEATED FILTERS YOU BUY HAVE AT LEAST 15 PLEATS PER FOOT. CHANGE PLEATED FILTERS EVERY 3 MONTHS OR SOONER IF YOU SMOKE OR HAVE PETS OR HAVE AN UNUSUALLY DIRTY ENVIRONMENT. I HIGHLY RECOMMEND AAF "PERFECT PLEAT" MERV 7 OR MERV 8 PLEATED FILTERS. |
|
- Posted by alan_s_thefirst (My Page) on Fri, Aug 10, 12 at 21:21
| I use a washable electrostatic filter - seems to allow decent airflow, has saved me a fortune on the expensive disposables. Worked well with my dog in the house. |
|
- Posted by countryboymo (My Page) on Sun, Aug 12, 12 at 2:45
| I have a deep filter tray with tabs for 1" filters or with the tabs folded up a 4" slides down in. 20x25x4" 6-8 merv pleated is what I run. If a person can run a 4" filter its unbelievable about the amount of actual filter media and surface area for air to flow in comparison to a 1" filter. Like everyone else said... very high merv ratings cause very high restriction and a little dirt/dust really plugs them fast in comparison. I have seen 1400merv filters which is crazy. I have sealed my duct system and used brush on mastic but I know it is still not sealed perfect enough to justify a 1400 filter. If the filter(s) are not right at the furnace/air handler and are behind the return vent putting a high merv on these systems pull even more air through unsealed nooks and crannies and in some systems it is gaping holes. |
|
- Posted by zunehdrocks (My Page) on Thu, Jan 24, 13 at 21:06
| Some of the filterete filters don't really have that much air resistance. The problem appears when you get their micro allergen reduction series and above. Filterete's dust reduction and also their dust and pollen reduction have pretty low air resistance , so you should be fine with filterete. Fiberglass filters are worthless. They can't even filter salt. It's sad. (Don't try it when the filter is inside the system) |
|
- Posted by countryboymo (My Page) on Sat, Jan 26, 13 at 14:08
| plain and simple fiberglass filters are just above worthless. The black filter media cloth over a fiberglass makes a secondary filter that has decent filtration but poor surface area and as dust starts to build up the air flow will drop like a rock. My 4" thick filters have 12 FEET of filter media on a 20x25x4" Click the link.. Surface area is key to any filter system if you really want it to perform. |
Here is a link that might be useful: Here is a 4
|
| I have replaced many a blower, sold many a furnace because of the 3M filters. 3M is trying to keep HVAC service techs in business. Seriously, pleated filters, change every 30-60 days.I highly recommend an electrostatic air cleaner. There is no filter, and you clean it every 6 months in the tub or with a hose.Gets out 98% of what harms you. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.