Return to the Heating & Air Conditioning Forum | Post a Follow-Up

 o
Furnace Not Functioning

Posted by mc87yanks (My Page) on
Sun, Apr 21, 13 at 22:01

We just returned home from a short weekend trip and noticed that the house was very cold when we walked in the door. However, the HVAC fan was running continuously. Long story short, the fan runs continuously, even with the thermostat turned off and the Y&G wires removed from the thermostat. I rehooked up the thermostat and jacked up the heat, yet even with the fan running the pilot does not light at all. The only way to shut off the fan is to turn off the power switch to the furnace.

The model of the furnace is a Ruud UPGH-07EAUER. Anyone have any idea what it could be? Thanks


Follow-Up Postings:

 o
RE: Furnace Not Functioning

There are 8 ways to troubleshoot the problem and as follows

* First of all we have to be sure that the switch is on "heat" rather than on "cool"

* Check the temperature that was already set.

* Compare the temperature with the room temperature, Set the temperature higher than 5 degree compared with room temperature and see that the furnace got kicked on.

* Trace the thermostat wire that it got any breaks or not. If there are any break in thin wire, we have to rectify it.

* Replace the battery. If you have a power outage with a dead battery.

* Open the thermostat and gently blow out any dust or debris.

* If you can't make the program settings work, you can bypass them altogether.

Here is a link that might be useful: kitchen exhaust hood cleaning toronto


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Heating & Air Conditioning Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here