|
| My regular HVAC guy can't figure this one out, so I hope some of you can.
For an indoor pool enclosure I need the furnace to heat the room when the temp is too low, run just the fan when the temp is too high, run the fan when the humidity is too high and run the fan when the pool heater is on (the furnace and heater share the same flu). I have 2 thermostats and a humidistat in the pool enclosure. How should all this low voltage stuff be wired? Right now the furnace runs constantly heating the enclosure to 90+! Thanks! |
Follow-Up Postings:
|
| You said the furnace runs constantly. Do you literally mean that you are getting a call for heat and fan ALL THE TIME? 24/7? Do you ever have fan only? Do you ever have the system off? Your hvac dealer can contact the tech support at the thermostat manufacturer for help and wiring diagrams Good luck |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.