Return to the Heating & Air Conditioning Forum | Post a Follow-Up

carrier zonekit2zcar

Posted by stretch1a (My Page) on
Wed, Mar 5, 14 at 12:47

I have a system with a carrier zonekit2zcar installed. I recently added another output on my primary duct, installed a motorized damper, which only closes part of the way. Is there any way to increase the time that the zone control card send the closed & open voltage to the damper? If not is there available a dampner that will work with this controller? I have also installed a damper control card with power supply to allow for the two dampers.

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Heating & Air Conditioning Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here