|
Fri, Feb 15, 13 at 19:29
| Hi everyone, We had a plumber in today to bleed our rads. He also changed the batteries on the thermostat and fiddled around with the boiler. Since he left the temperature has dropped dramatically and he's refused to come back stating there is nothing he can do. HELP! When we turn on the thermostat, the boiler kicks in, but we aren't getting any hot water running into the rads. Is it the thermostat? Any suggestions welcome, or it's going to be a cold night! |
Follow-Up Postings:
|
| Can you tell if your circulator pump is running? Are all the breakers for the heating system OK? Do you hear any noises in the pipes? Do any of the pipes near the boiler get hot? Have any valves been closed? You may need another service call from a more competent and responsible service company. SR |
|
| Is the person a plumber, heating contractor, or a handyman? This guy sounds like a jack of all trades master of none. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.