|
Sun, Feb 5, 12 at 12:21
| Hi, I have a Lennox XP17 2.5 Tand installed a year ago. Just wondering in my temperature output at the registers is just about normal.
With heat pump running and no heat strips engaged, I am receivng a temp of 80 degrees at the registers. conditions: house temp: 68F
Is 80 that I am receiving at the registers normal or am I below what it should be?? tks |
Follow-Up Postings:
|
- Posted by tigerdunes (My Page) on Sun, Feb 5, 12 at 14:06
| Carl Your thermostat is able to maintain it's setting at 68 degrees fah at outside temp of 14 degrees fah? And without aux Heat strips engaged? I assume the heat strip has been locked out? Yes, I would say an 80 deg supply temp with those conditions are entirely normal. IMO |
|
- Posted by weedmeister (My Page) on Mon, Feb 6, 12 at 19:33
| Actually souunds pretty good to me. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.