Return to the Heating & Air Conditioning Forum | Post a Follow-Up

Strange ductwork - Supply connected to return???

Posted by Paul500 (My Page) on
Mon, Jan 21, 13 at 22:21

I have an older home that has had many previous owners, and I am trying to understand a strange run of ductwork at my furnace. There is a circular duct (near top of photo) about 10" in diameter that connects directly to the return plenum of my furnace. The strange thing about it is that is comes right off a supply duct about 5 or 6 feet away to the left. What could possibly be the purpose of this? My only guess is that either the return was starved or to heat/cool the return air before it enters the furnace. I am no HVAC professional, but those would not be legitimate reasons, right? If so, what could it be possibly for? It also has a damper on it, and I accidentally nudged it, so not sure to leave it open or closed. Any advice would be much appreciated! Thanks.

Follow-Up Postings:

RE: Strange ductwork - Supply connected to return???

Just a homeowner here, but it sounds like this is the bypass that houses your furnace's humidifier. In heating season, the damper would be open allowing some warm air to return to the return side picking up moisture from the humidifier on the way.

During cooling season this damper would be shut.

RE: Strange ductwork - Supply connected to return???

Some of the older homes in my part of the country have very old metal duct systems that were originally sized for heating only. When they finally install a full central system, they find they have too large of a cooling system... so they install these bypass trunks to dump the extra air back into the return. I dont have my ductulator handy but i imagine that 10" will be around 300-350cfm of air. Close the damper and see if your vents become noisy (cooling mode).

Hope that helps

RE: Strange ductwork - Supply connected to return???

I understand that bypasses are sometimes used on zoned systems.

RE: Strange ductwork - Supply connected to return???

Thanks all for all the theories. There was an old humidifier connected, but it was on the supply plenum, on the right side of the picture, near where you see the exhaust vent. I took that out awhile ago. Perhaps the system was originally sized for heating only. In that case, would I leave the damper open or closed in the winter? I have it closed now, and the vents are a little noisier, but nothing to complain about. I am not familiar with a zoned system, but my ductwork does have a lot of manual dampers around. Do people ever replace or redo their old ductwork? Mine seems poorly pieced together, dirty, and disorganized. My home also has an addition that receives weak supply so it's supplemented with electric baseboard heaters -- not to mention returns that use the basement ceiling joists instead enclosed metal ductwork. Seems redoing the ductwork may result in a more efficient, cleaner, and better designed system. Sounds expensive and not sure if it would add to the resale value. Thoughts?

RE: Strange ductwork - Supply connected to return???

Your duct work sounds very inefficient to a point where you have to supplement it with electric baseboard heating. You are wasting money with your present set up. Fixing the duct work will save money in the long term.

New duct work does not add to the resale value of the house. A buyer does expect the duct work to be in good condition.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Heating & Air Conditioning Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here