|
Wed, Sep 10, 03 at 0:36
| I didn't see an area for testing so this looked like the most likely forum to try my hand at inserting photos. Fingers crossed :o
Monica (from the Kitchen Forum) 
|
Follow-Up Postings:
|
| Drats! img src="http://www.pbase.com/image/2425790/medium" |
|
 |
|
- Posted by Terramadre (My Page) on Wed, Sep 10, 03 at 7:47
| Pbase may not allow direct linking. Paste the URL into "Optional Link URL". Test Forum. |
Here is a link that might be useful: Picture
|
| Thanks. Pbase does allow direct linking (and I am a paying supporter)...I just don't know how to do it on this forum :( Below is the EXACT formula I was told I needed to use...
Of course replacing what's between the " " with my link. Are there any of those characters above that are not needed, for instance the " " or the < >? Thanks and thanks for the Test Forum. I thought I'd seen that before but was looking in the wrong location for it. |
|
- Posted by lazygardens (My Page) on Wed, Sep 10, 03 at 12:45
| They are all needed. [img src="http://www.pbase.com/image/2425790/medium"] but replace the [] with the pointy beackets above the comma and period. |
|
| Monica, I looked at the code for your first try and you have everything correct, except you have http:// typed twice in your code. This is what you used: Type this one instead: |
|
- Posted by shortleaf2002 (indianbean@comcast.net) on Fri, Sep 12, 03 at 10:07
| Hey nice picture of Bo and Kitty! Remember to put the above code where you want it to appear in your post just use the preview button. |
|
- Posted by Terramadre (My Page) on Sun, Sep 14, 03 at 10:25
| You copied the URL from the Address bar. Right click on the pic, click Properties and copy that URL.
|
|
| Really great picture Monica. How did you do it? Carol |
|
| Monica, when you right click on the picture, you have to open it in another window, and copy THAT url, not the original url of the picture when it just opened..... |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Web Authoring Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.