|
Sun, May 28, 06 at 0:31
| Supposed I have a room where I want 4 speakers to be playing the same source.. how would I wire them? Do I run 2 pairs of wires (one pair for each speaker pair, ie 4 wires) all the way to the distribution source and then tied them together or can I run a pair from the source to the first speaker pair 1 and then a short run from speaker pair 1 to pair 2? If the latter, how would I wire them? In series or parallel?
Thanks
|
Follow-Up Postings:
|
| What kind of speakers are these? What reciever are you using? If using inwall speakers you dont need much power so you could probably connect them in series. If these are floorstanding main speakers then you could connect them to the B output of your reciever. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Entertainment Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.