Delay Wash: Set the desired cycle and options, then press the Delay Wash button repeatedly for the desired number of delay hours 1 to 19 to appear on the display, then press Start. Delay will not activate if Start isn't pressed, the machine will not run at all, it will cancel the entire cycle selection and turn off. Soak function: Choose a cycle on the rotary knob and other desired options (temperature, spin speed, soil), then press Special Care button to select Soak for adding it to whichever cycle is chosen on the rotary knob. Delay Wash with Soak presumably is done by selecting all the settings first including Soak, then choose the Delay Wash hours and press Start. StainCare option starts with warm water, then later adds hot water to increase the temperature for handling various kinds of stains and soils. Soak and StainCare may be selectable together by pressing the button repeatedly until both lights are on, try it to see if that's possible.. The Special Care button also selects Rinse+Spin or Speed Wash as specific cycles. The Add Garments light is NOT part of the Special Care button choices. Add Garments turns on early in the cycle to indicate there's still enough wash time remaining to clean them if the machine is paused to add more clothes. It turns off after enough wash time has elapsed that added clothes may not get clean.

Yikes! I can see where that is a problem. I had a 14 year old who could not make the 4 stairs to the ward so I placed a piece of the turf on the porch. She used it all the time, but it did get rank! My yard install took a full week with new drainage and lots of underlaying stone and sand. So I am sure that is why it still works for me.

Hi! Did you finish this project? I’m planning on using GV on my upper cabinets and walls. How did yours turn out?

"Very visible" is subjective. A seam in bookmatched natural stone is quite conspicuous, but that's the point. The swirls won't match, however, the seam quality will be superior to any natural stone or estone.