|
Fri, Dec 5, 08 at 23:16
| Have a sears garage door that will not close unless you hold the interior button down. I notice a amber LED on the back of the unit next to Red button to sync the remotes that is flashing 4 times. It has a D14 listed next to it. I have an ideal door next to it that operates fine. If I block the sensor on the working door, I notice the Amber light only flashes once. Is there any trouble shooting code indicating what 4 blinks are for? I did notice that the floor sensors one is green light and one is amber. The green one as never been on and always opened and closed fine.
Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Dec 8, 08 at 10:12
| The code for the LED flashing 4 times is "misaligned door sensors." Tweak the sensors until the small light on each one is on. They will not work otherwise. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.